Manual static pile driver for pressing the precast concrete spun pile and square pile with noise free

1. Product description : The traditional driving of precast piles still dominates the world by hydraulic hammer or diesel hammer. However, because of regulations and environmental issues the various methods that form the piles in the ground also become more popular.

Pushing or pressing pile instead of driving the high quality precast concrete piles unites the advantages of the piles with those of pushing. Noise is much reduced to a minimum and no vibrations are caused. In partucular in urban areas this is favorable.

In Asia this method has been successfully used for over a decade. T-works as a professional manufacturer for hydraulic static pile driver is always keeping impoving the design to meet the customers' actual requirement. We also can call it jack in pile machine by hydraulic jack.

The static pile driver can drive the precast concrete pile from 150mm to 650mm for square pile, 300mm to 800mm for round pile. It also can push the tube, triangle pile, H-pile, etc by changing its jaws inside of the clamping box.

The capacity is from 80tons to 1200tons.

The lifting crane available is from 5T to 25 T.


2. Application:

1) Clay, soft soil, sand layer ,etc

2) Noise regulated area

3) Vibration regulated areas, such as near buildings, precision instrument buildings, subway, overpass and so on.


3. Specification of the ZYC360 static pile driver :

4. Features advantages :

1) Patents support the technical and keep improving all the times

With keeping moving thought inside of all T-works' staffs, we always gather the detail requirements from our customers and know what they want according to the actual condition during working. The technical engineer will do improvment and make some new design to suit the actual needs, that is why we have accumulated many patents .





2) Side mechanism

Side piling mechanism can reach at least 50% of center piling capacity, sharing the same clamping box and jaws with center. It can push the triangle pile, square pile, round pile, H- pile, and other shapes.




3) Assembly and De- mobilization

After shipment, the machine has to be assembled using the instructions and maybe with help of our employees as usual , This takes one or two days, after which a trainning can be given in working with the hydraulic pile pusher.
This is a special design for its cabin which is good for crane transporation .



4) After sale service and quality gurantee

6) We guarantee to keep our Main Machine in good repair for 1 year after sale and 6 months for accessories. In the guarantee time, any quality problem caused by manufacturing after confirmation of us shall be repaired for free; Exceed the guarantee time, we can also supply repair services to our products charged for repair cost only.

Changsha Tianwei Engineering Machinery Manufacturing Co.,Ltd is a modern joint -stock private  enterprise found in 2005, it is specialized in R & D and manufacturing series of Hydraulic Static Pile Driver and other piling machinery such as bored pile drilling rig, hydraulic piling hammer, etc.

As the largest  exporter for hydraulic static pile driver in China, T-works is well known in domestic and abroad, and also holds the most market  share in Singapore, Malaysia, Indonesia, Ukraine, Thailand, Brunei, Vietnam ,Phillipine, The West Europe, Middle East and so on.

With bigger than 22000m2 of workshop , T-works also had a group that are advanced engineers and CNC machines, lean production ,6S management, as well as Global Marketing & After Sale Service. Nowadays we can meet different requirements of different construction worksites from design, manufacture, sale and service.

Our company follows the motto"Modesty, Sincerity, and To Be Excellent", e are willing to serve all our customers and be good friends with them.

At any time, we provide not only products of reliable quality but also excellent and efficient service.

By any way our professionals will work hard to find a good technical solution to satisfy the needs of customers.

At any where we have the facilities to keep in touch with our customers, technical know-how and flexibility in designing machines and doing business so as to keep up with the development of the market.